Ravica's Sensor Controlled Relay – The Rosetta Stone?

A few weeks ago I talked about using the sensor controlled relay to turn on lights once an alarm had been triggered. In this blog I wanted to give another example of how versatile these units can be.

Solutions . . .

A great example is the solution that I found for a local amusement park. One of their outdoor venues was having an issue with their digital photography equipment overheating. It wasn’t economical to add air condition to the unit, so they needed to find a way to turn on multiple overhead fans automatically.

The management of this unit fell under the IT department, and the admin wanted to remotely monitor the data from his office (or any other portable device). The end solution was to monitor multiple environmental variables with the Ravica Sensor Probe and use the Sensor Controlled Relay to switch on the fan when the room temperature rises beyond the threshold level.

Since the sensor control unit has a user friendly web interface and an autosense feature, setting up the Sensor Controlled Relay is easy. The Sensor Controlled Relay can also be controlled via external computers, using the included SNMP command line utilities either interactively or programmatically.

From the unit itself, you can monitor the status of the Sensor Controlled Relay by four LEDs on the board. You can also monitor the unit remotely by using SNMP traps or the web interface, as well as e-mail and SMS alerts.

Implementation . . .

“The Sensor Controlled Relay provides 1 high-power SPDT 5V relay, with the maximum load up to 15A at 220 VAC. It includes Metal Oxide Varistors (MOVs) and Snubber circuits to protect the open contacts of the relays from high voltage spikes or noise transients. It monitors the power and load, and accepts a control signal, which is sent from the SensorProbe.”

We outsourced a local contractor to do the electrical work and the end result was better then we expected. Not only did we eliminate the equipment from overheating, but we are also able to trend the temp of the units over a given amount of time. This gave the admin a better picture of demand and heat generation.

Another thing to remember is the inlaid protection of this sensor. The Sensor Controlled Relay, it has a built in 16Amp circuit breaker and a 15Amp fuse (380 VAC, 125 VDC) giving it double protection for the external devices and possible damages by electrical fault. This assures protection for your sensor and your investment.

Conclusion . . .

As you can see, the Ravica Sensor Controlled Relay has many uses. It’s ability to control an array of analog devices makes it a versatile solution. It’s ability to monitor and protect itself make it a smart investment. That is why I recommend it every chance that I get.

– JimmyD

Tags: air conditioning, airflow monitoring, climate control, Data Center, data room, environmental monitoring, humidity monitoring, Intelligent Sensors, Jimmy D, power cooling, temperature, temperature monitoring, web interface